banner

Your location：

/

Raw materials

/

Epoxy

/

Epoxy board

/

3240

分类出来 



Number of views:

1000

3240

Product No.: 3240 board

Product color: red, white, brown red, gray

Product thickness: 0.2mm-150.0mm

Product specification: 1020 * 1220; 1220 * 2020; 1220 * 2440

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Quantity

-

+

Stock:

0

Category

返回列表



1

Qualification Documents

Raw Material Description

Parameters

　　Aqua / yellow / black light board 3240 is a kind of hard board insulating material, which is made of imported alkali free fiberglass cloth soaked with imported epoxy resin, added with imported flame retardant, adhesive, etc., and hot pressed.

The black anti-static laminate is a kind of insulating material which is specially added with anti-static material to make its surface resistivity less than 109, so as to achieve the function of absorbing electrostatic charge.

项目 Items		测试方法 Test Method	单位 Unit	典型数值 Typical Values
物理性能 Physical Properties	颜色 Color	目测 Visual inspection	——	淡绿色/黄色 Light green / yellow
	比重 Specific Gravity	IEC 60893-2:2003	g/cm3	1.90- 2.15
	吸水率 Water absorption	IS062:2008	%	<0.3
电器性能 Electrical properties	电气强度(垂直) Electric strength	IEC 60893-2:2003	KV/mm	≥14(3.0mm)
	击穿电压(平行) Electric strength	IEC 60893-2:2003	KV	≥60
	体积电阻率 Volume Resistivity	IEC 60093:1980	Ω.m	≥1.0*10^12
	表而电阻率 Surface Resistivity	IEC 60093:1980	Ω	≥1.0*10^14
	介电常数(1 MHZ) Dielectric constant	IEC 60893-2:2003	--	4.0-5.5
	介质耗散因傲(1MHZ) Dissipation Factor	IEC 60893-2:2003	--	0.04-0.05
	耐电痕化指数PTI Proof Tracking Index PTI	IEC 60893-2:2003	V	≥200
	浸水24H厚绝缘电阻 Insulation resistance after immersion 24Hrs in Water	IEC 60893-2:2003	Ω	≥5*10^10
机械性能 Mechanical properties	垂直层向弯曲强度 Flexural Strength丄	IEC 60893 2:2003	Mpa	≥340
	平行向冲击强度(简支梁) Flexural Strength⊥	IEC 60893 2:2003	KJ/m2	≥60
	拉伸强度 Tensile Strength	IEC 60893-2:2003	Mpa	≥300
	粘结强度// Bond Strength//	IEC 60893-3-4:2003	N	≥8000
	垂直向压缩强度 Compressive Strength⊥	IEC 60893-2:2003	Mpa	≥350
燃烧性能 Flame Resistance performance	温度指数 Temperature Index	IEC 60085:2004	℃	155
	阻燃性 Flame Resistance	IEC 60893-2:2003	—	V-0
	毒性含里(卤素的释放等) Toxicant(Emissior)halogen etc.)	E662	—	低 Low
其他性能 Other properties	抗丙酮 Acetone Resistance	boiled	min	30(OK)

　　Material properties

Low cost, voltage and arc resistant products.

Excellent flame retardant (UL 94 V-0 grade)

Excellent voltage resistance (electrical strength ≥ 10kV / mm)

Excellent heat resistance (heat resistance grade above 155 ℃)

Excellent thermal shock resistance (operating temperature - 273 ℃ to + 155 ℃)

Excellent machining performance and high degree of automation

RoHS certified products

RoHS, reach certified products

Scan the QR code to read on your phone

CUSTOM PRODUCT REQUIREMENTS

Username used for comment:

客户留言

Description:

* Product Demand：

Name：

性别：

男

女

Tel：

CUSTOMIZATION PROCESS

Cutting equipment introduction Automatic cutting saw is a high precision cutting machine equipped with numerical control program operation, the workers in the PC or touch screen input size data needed to open the material, start the machine to run automatically, to achieve automatic material feeding board, automatic calibration positioning for precision cutting.

cutting

Introduction to fine carving equipment Carved machine (CNCengravingandmillingmachine) it is a kind of nc machine tools. Metal carving machine can be used for non-contact cutting and drilling of metal or non-metal plates and tubes, especially for laser cutting and processing of stainless steel plates, iron plates, silicon wafers, ceramic wafers, titanium alloys, epoxy, A3 steel, diamond and other materials. The equipment has stable and reliable operation, good processing quality, high efficiency, simple operation and convenient maintenance.

carved

Machining equipment: CNC machining usually refers to the computer digital control of precision machining, CNC machining lathes, CNC milling machines, CNC milling machines, such as CNC boring and milling machine. CNC also known as computer gongs, CNCCH or nc machine tool is actually Hong Kong there's a term, then was introduced into China, the pearl river delta is CNC milling machine, and in jiangsu area to be called "CNC machining center" a kind of mechanical processing, is a new processing technology, main job is processing program, the original manual work to computer programming. Of course, experience in manual work is required

Machining center CNC

Introduction of grinding equipment Lapping machine is a grinding machine that grinds the surface of a workpiece with grinding tools coated or embedded with abrasive. It is mainly used for grinding high precision plane, inner and outer cylinder, cone surface, sphere, thread surface and other surface in the workpiece. The main types of grinding machine are disc type grinding machine, rotary type grinding machine and a variety of special grinding machine. The control system of grinding machine takes PLC as the control core, and the text display is the control mode of man-machine dialogue interface. Man-machine dialogue interface can talk with people about equipment maintenance, operation, fault and other information; Operation interface intuitive and convenient, program control, simple operation. Omni-directional safety considerations, abnormal state of the wrong operation is invalid. Real-time monitoring, fault, error alarm, easy maintenance.

grinding

Introduction to milling machine equipment Milling machine is a machine tool for milling workpiece with milling cutter. Milling machine can milling plane, groove, gear, thread and spline shaft, but also can process more complex surface, the efficiency is higher than planer, in the machinery manufacturing and repair department is widely used. Milling machine is a widely used machine tool, in the milling machine can be processed plane (horizontal plane, vertical plane), groove (keyway, t-slot, dovetail slot, etc.), gear parts (gear, spline shaft, sprocket), spiral surface (thread, spiral slot) and all kinds of curved surface. In addition, it can also be used for the surface of the rotating body, inner hole machining and cutting work. When the milling machine is working, the workpiece is mounted on the work table or dividing head accessories, milling cutter rotation for the main movement, supplemented by the table or milling head feed movement, the workpiece can obtain the required machining surface. Because it is multi - edge intermittent cutting, so the productivity of milling machine is higher. Simply put, a machine for milling, drilling, and boring workpieces.

Milling machine

CNC bending machine is equipped with a mold (general or special mold) under the cold state of the sheet metal bending into a variety of geometric section shape of the workpiece. It is a sheet forming machine designed for cold rolling sheet metal processing, widely used in automobile, aircraft manufacturing, light industry, shipbuilding, container, elevator, railway vehicle and other industries sheet bending processing.

CNC bending machine

Introduction to punching machine equipment The punching machine is made up of four parts which cooperate with each other to complete the punching process. First move material to automatic punching machine camera scanning area, camera after scanning the image processing and control part of the signal, the control part of the received signal, after further processing and control the transmission part of the action, make the punch in the plane of the X axis and Y axis and finish to start working after an action of pneumatic parts, solenoid valve control cylinder is punching action. Automatic punching machine printing positioning hole, the whole action in one go, fast, accurate, high efficiency.

punch

Introduction of stamping equipment The die used for stamping is called stamping die, short for stamping die. Die is the material (metal or non-metal) batch processing into the required punching tools. Punching die is very important in stamping, without the required punching die, batch stamping production is difficult to carry out; Without the advanced punch, the advanced stamping process can not be realized. Stamping process and die, stamping equipment and stamping materials constitute the three elements of stamping process, only they can be combined to get stamping parts.

stamping

Introduction to lathe equipment "CNC lathe is one of the more widely used CNC machine tools. It is mainly used for cutting the inner and outer cylindrical surface, the inner and outer conical surface of arbitrary cone Angle, the complex rotary inner and outer surface and the cylindrical and conical thread of shaft parts or disk-type parts. CNC machine tool is in accordance with the pre-programmed processing procedures, automatically to be processed parts for processing. We put the parts of the processing craft route, process parameters and tool trajectory, displacement, cutting parameters and auxiliary functions, in accordance with the instruction code and procedures prescribed by the CNC machine format write into the processing program list, then this program list the contents of the records in the control medium, and then input to the numerical control machine tool numerical control device, which command machining parts."

lathe