banner
Your location:
Homepage
/
/
/
/
FR5/FR-5
Number of views:
1000

FR5/FR-5

Product No.: FR5 board

Product color: red, white, brown red, gray

Product thickness: 0.2mm-150.0mm

Product specification: 1020 * 1220; 1220 * 2020; 1220 * 2440
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Raw Material Description
Parameters
  Water green / yellow / black light plate FR5 is a kind of hard plate insulating material, which is made of imported alkali free glass fiber cloth soaked with imported epoxy ester resin and added with imported flame retardant, adhesive, etc.
 
The black anti-static laminate is a kind of insulating material which is specially added with anti-static material to make its surface resistivity less than 109, so as to achieve the function of absorbing electrostatic charge.
  

项目

Items

测试方法 

Test Method

单位

Unit

典型数值

Typical Values

物理性能 
Physical Properties
颜色  Color 目测
Visual inspection
—— 淡绿色/黄色
Light green / yellow
比重  Specific Gravity IEC 60893-2:2003 g/cm3 1.90- 2.15
吸水率  Water absorption IS062:2008 % <0.3
电器性能
Electrical properties
电气强度(垂直)  Electric strength IEC 60893-2:2003 KV/mm ≥14(3.0mm)
击穿电压(平行)  Electric strength IEC 60893-2:2003 KV ≥60
体积电阻率  Volume Resistivity IEC 60093:1980 Ω.m ≥1.0*10^12
表而电阻率  Surface Resistivity IEC 60093:1980 Ω ≥1.0*10^14
介电常数(1 MHZ)  Dielectric constant IEC 60893-2:2003 -- 4.0-5.5
介质耗散因傲(1MHZ)  Dissipation Factor IEC 60893-2:2003 -- 0.04-0.05
耐电痕化指数PTI  Proof Tracking Index PTI IEC 60893-2:2003 V ≥200
浸水24H厚绝缘电阻  Insulation resistance after immersion 24Hrs in Water IEC 60893-2:2003 Ω ≥5*10^10
机械性能
Mechanical properties
垂直层向 弯曲强度  Flexural Strength丄 IEC 60893 2:2003 Mpa ≥340
平行向 冲击强度(简支梁) Flexural Strength⊥ IEC 60893 2:2003 KJ/m2 ≥60
拉伸强度  Tensile Strength IEC 60893-2:2003 Mpa ≥300
粘结强度//  Bond Strength// IEC 60893-3-4:2003 N ≥8000
垂直向压缩强度        Compressive Strength⊥ IEC 60893-2:2003 Mpa ≥350
燃烧性能
Flame Resistance performance
温度指数  Temperature Index IEC 60085:2004 155
阻燃性  Flame Resistance IEC 60893-2:2003 V-0
毒性含里(卤素的释放等) Toxicant(Emissior)halogen etc.) E662  Low
其他性能
Other properties
抗丙酮 Acetone Resistance boiled min 30(OK)

 

 
  Material properties
 
High temperature resistance above 180 ℃
 
Excellent flame retardant (UL 94 V-0 grade)
 
Excellent voltage resistance (electrical strength ≥ 16Kv / mm)
 
Excellent water absorption performance (water absorption ≤ 0.2%)
 
Excellent heat resistance (heat resistance grade above 155 ℃)
 
Excellent thermal shock resistance (operating temperature - 273 ℃ to + 155 ℃)
 
Excellent machining performance and high degree of automation
 
RoHS, reach certified products
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Previous

CUSTOM PRODUCT REQUIREMENTS

Username used for comment:
客户留言
Description:

CUSTOMIZATION PROCESS

cutting
Cutting equipment introduction Automatic cutting saw is a high precision cutting machine equipped with numerical control program operation, the workers in the PC or touch screen input size data needed to open the material, start the machine to run automatically, to achieve automatic material feeding board, automatic calibration positioning for precision cutting.
cutting
carved
Introduction to fine carving equipment Carved machine (CNCengravingandmillingmachine) it is a kind of nc machine tools. Metal carving machine can be used for non-contact cutting and drilling of metal or non-metal plates and tubes, especially for laser cutting and processing of stainless steel plates, iron plates, silicon wafers, ceramic wafers, titanium alloys, epoxy, A3 steel, diamond and other materials. The equipment has stable and reliable operation, good processing quality, high efficiency, simple operation and convenient maintenance.
carved
Machining center CNC
Machining equipment: CNC machining usually refers to the computer digital control of precision machining, CNC machining lathes, CNC milling machines, CNC milling machines, such as CNC boring and milling machine. CNC also known as computer gongs, CNCCH or nc machine tool is actually Hong Kong there's a term, then was introduced into China, the pearl river delta is CNC milling machine, and in jiangsu area to be called "CNC machining center" a kind of mechanical processing, is a new processing technology, main job is processing program, the original manual work to computer programming. Of course, experience in manual work is required
Machining center CNC
grinding
Introduction of grinding equipment Lapping machine is a grinding machine that grinds the surface of a workpiece with grinding tools coated or embedded with abrasive. It is mainly used for grinding high precision plane, inner and outer cylinder, cone surface, sphere, thread surface and other surface in the workpiece. The main types of grinding machine are disc type grinding machine, rotary type grinding machine and a variety of special grinding machine. The control system of grinding machine takes PLC as the control core, and the text display is the control mode of man-machine dialogue interface. Man-machine dialogue interface can talk with people about equipment maintenance, operation, fault and other information; Operation interface intuitive and convenient, program control, simple operation. Omni-directional safety considerations, abnormal state of the wrong operation is invalid. Real-time monitoring, fault, error alarm, easy maintenance.
grinding
Milling machine
Introduction to milling machine equipment Milling machine is a machine tool for milling workpiece with milling cutter. Milling machine can milling plane, groove, gear, thread and spline shaft, but also can process more complex surface, the efficiency is higher than planer, in the machinery manufacturing and repair department is widely used. Milling machine is a widely used machine tool, in the milling machine can be processed plane (horizontal plane, vertical plane), groove (keyway, t-slot, dovetail slot, etc.), gear parts (gear, spline shaft, sprocket), spiral surface (thread, spiral slot) and all kinds of curved surface. In addition, it can also be used for the surface of the rotating body, inner hole machining and cutting work. When the milling machine is working, the workpiece is mounted on the work table or dividing head accessories, milling cutter rotation for the main movement, supplemented by the table or milling head feed movement, the workpiece can obtain the required machining surface. Because it is multi - edge intermittent cutting, so the productivity of milling machine is higher. Simply put, a machine for milling, drilling, and boring workpieces.
Milling machine
CNC bending machine
CNC bending machine is equipped with a mold (general or special mold) under the cold state of the sheet metal bending into a variety of geometric section shape of the workpiece. It is a sheet forming machine designed for cold rolling sheet metal processing, widely used in automobile, aircraft manufacturing, light industry, shipbuilding, container, elevator, railway vehicle and other industries sheet bending processing.
CNC bending machine
punch
Introduction to punching machine equipment The punching machine is made up of four parts which cooperate with each other to complete the punching process. First move material to automatic punching machine camera scanning area, camera after scanning the image processing and control part of the signal, the control part of the received signal, after further processing and control the transmission part of the action, make the punch in the plane of the X axis and Y axis and finish to start working after an action of pneumatic parts, solenoid valve control cylinder is punching action. Automatic punching machine printing positioning hole, the whole action in one go, fast, accurate, high efficiency.
punch
stamping
Introduction of stamping equipment The die used for stamping is called stamping die, short for stamping die. Die is the material (metal or non-metal) batch processing into the required punching tools. Punching die is very important in stamping, without the required punching die, batch stamping production is difficult to carry out; Without the advanced punch, the advanced stamping process can not be realized. Stamping process and die, stamping equipment and stamping materials constitute the three elements of stamping process, only they can be combined to get stamping parts.
stamping
lathe
Introduction to lathe equipment "CNC lathe is one of the more widely used CNC machine tools. It is mainly used for cutting the inner and outer cylindrical surface, the inner and outer conical surface of arbitrary cone Angle, the complex rotary inner and outer surface and the cylindrical and conical thread of shaft parts or disk-type parts. CNC machine tool is in accordance with the pre-programmed processing procedures, automatically to be processed parts for processing. We put the parts of the processing craft route, process parameters and tool trajectory, displacement, cutting parameters and auxiliary functions, in accordance with the instruction code and procedures prescribed by the CNC machine format write into the processing program list, then this program list the contents of the records in the control medium, and then input to the numerical control machine tool numerical control device, which command machining parts."
lathe
Other processing
Special customized material Special urgent material Special insulation scheme customized
Other processing

CUSTOMIZATION PROCESS

 Suzhou Huayan Fuji Advanced Materials Co., Ltd.

Consulting And Processing

 Suzhou Huayan Fuji Advanced Materials Co., Ltd.

Vip Customer Service Quote For You

 Suzhou Huayan Fuji Advanced Materials Co., Ltd.

Proofing Confirmation

 Suzhou Huayan Fuji Advanced Materials Co., Ltd.

Order Payment

 Suzhou Huayan Fuji Advanced Materials Co., Ltd.

Transportation And Distribution

COMPANY PROFILE

imgboxbg

Plant Area

6000㎡

imgboxbg

Number Of Workers

128人

imgboxbg

Processing Equipment

120台

imgboxbg

Production Equipment

30台

imgboxbg

Spontaneous Logistics

快捷

imgboxbg

Partner

3000多家

 Suzhou Huayan Fuji Advanced Materials Co., Ltd.

Your satisfaction is our goal

Fax:0512-62550366
Tel:
159-5008-1871 / 150-5150-0099
E-mail:sales@huayanfuji.com 

Address: No. 27, Chunfeng Road, Huangdai Town, Xiangcheng District, Suzhou City, China

Copyright: Suzhou Huayan Fuji New Material Co., Ltd.    苏ICP备06008642